Product features:

The body part of the product is formed in one casting process and has undergone long-term aging treatment. Compared to the panel assembly process, long-term use has minimal deformation and can effectively adapt to various harsh environments;

Automotive paint, with high quality and strong scratch resistance, remains shiny and new after years of use;

Strong structure, good rigidity, precision, reliability, durability, and high testing efficiency;

The control panel separates strong and weak electrical phases, avoiding mutual interference and panel breakdown due to excessive current, improving the safety of operation and the service life of the panel;

High power solid-state relay, with high power, low power consumption, no contact, no spark, high isolation between control and controlled, and long service life;

High torque permanent magnet synchronous motors have replaced old-fashioned reducers, resulting in low machine noise and extremely low failure rates;

The accuracy complies with GB/T231.2, ISO6506-2, and American ASTM E10 standards.

Applicable scope:

Determination of Brinell hardness of ferrous metals, non-ferrous metals, and bearing alloy materials

Such as hard alloy, carburized steel, quenched steel, surface quenched steel, hard cast steel, aluminum alloy, copper alloy, malleable castings, soft steel, quenched and tempered steel, annealed steel, bearing steel, etc.

Main technical parameters:

Measurement range: 5-650HBW

Test force: 1838.8, 2415.8, 7355.3, 9807, 29421N

(187.5, 250, 750, 1000, 3000kgf)

Maximum allowable height of the sample: 230mm;

Distance from the center of the pressure head to the machine wall: 120mm;

External dimensions: 700 * 268 * 842mm;

Power supply: AC220V/50HZ or 380V

Weight: 140Kg

Gross weight: 210Kg

Main attachments:

1 large flat workbench, 1 small flat workbench, and 1 V-shaped workbench each;

Steel ball pressure head: Φ 2.5 Φ 5 Φ 1 for each of 10;

Standard Brinell hardness block: 2 blocks