1. the purpose:
 This machine is suitable for testing the pressure and breaking ability of silicone rubber pipes, rubber, rubber-plastic pipes and high-pressure parts. 
2.Principles: 
1.The machine adopts signal transmission pressure, and the maximum breaking strength value is automatically retained when the sample is broken. 
2.Lock the tube between the collets and apply pressure at a certain speed or a certain pressure and time until the tube breaks. The system records the fracture value to provide the basis for its quality judgment 
3.The pneumatic booster pump imported from Germany is used as the pressure source, and the test pressure is high; 
4.The system pressure is adjusted by adjusting the driving air pressure, with a wide adjustment range and high pressure control accuracy;
3.Specifications: 
* Test station: single station 
* Test capacity: Test capacity: 0-200MPa 
*Drive air: 0.5MPa≤P≤0.8MPa
*Test medium: liquid (water or oil) 
* Power components: pneumatic booster pump, circuit control pressure sensor 
* Timer: Configurable 
*Unit switching: KG, N, LB, can be switched at will * Load Breakdown: 1/100,000 
* Load accuracy: ±0.5% %FS
*Display and control: Using a two-level control system of computer and PLC, the entire test process can be completed on the computer, the computer automatically generates the pressure-time curve, and stores various data, and the test report can be printed at any time. 
* Power supply: 220V 50Hz
*Weight: about 200KG