High temperature aging test chamber
     This equipment is mainly used for high temperature aging such as automotive AI, lenses, Haomi wave radar, mobile phones, diving supplies, electronic products, etc.; it simulates whether the performance of the product is normal under high temperature working conditions, whether there is distortion, black screen, broken frame, etc.; An integral part of the aging station is a drawer-like device that provides constant temperature. A device with manual opening and closing functions. Wide range of applications.

technical parameter:

1. Heating method: transparent infrared electric heating tube
2. Electric heating power: 1KW per furnace, 220VAC-500W/piece, a total of 6 groups of chambers.
3. Aging form: manual pallet feeding, pallet tooling is customized according to the product, one set per furnace (customer supply)
4. Aging chambers: 6, the inner wall size of the furnace chamber is 340(W/width)x230(H/height)x400(D/depth)mm
5. Aging temperature: room temperature～+120℃
6. Aging time: custom, 0~9999, seconds, minutes, hours can be adjusted
8. Control method: independent temperature control of each furnace cavity, over-temperature protection of electric heating temperature zone (probe and temperature control table)
9. Temperature fluctuation: ±2℃
10. Temperature uniformity: ±3°C (no load)
11. Heating rate: room temperature→+60℃≤5min
12. Cooling rate: +60℃→+30℃≤5min
13. Product loading and unloading method: Manual loading and unloading
14. Equipment surface temperature: working environment temperature +25℃
15. Equipment surface humidity: The working environment humidity (RH) is controlled at 85%±5%
16. Traceback function: Generate and save locally through Excel, support uploading MES
17. Current monitoring: accuracy 0.1mA, detection range 0-200mA, real-time monitoring during aging
18. Frame rate test: maximum 60 frames/s, real-time frame rate monitoring, average accuracy ≤ 0.1 frames/s
19. High temperature load-bearing slides: stainless steel industrial slides
20. Dimensions: 1800(L/L)*1000(W/W)*2000(H/H)mm (including casters/foot cups, excluding alarm lights and FFU)
21. Shell requirements: appearance color, powder coating shell;
22. Equipment structure material: Fangtong welding frame, inner cavity 304# stainless steel;
23. Safety device: leakage protection (30mA protection level), installation of leakage switch overheat protection
24. Human-machine interface: Kunlun Tong state 15-inch touch screen (6 grid temperature and time setting and display) can set the temperature and time of each furnace, can manually start the start and stop of a single furnace, can manually (single step) open a separate The furnace cavity can display the current working status of the first furnace cavity. After reaching the set time, a completion signal will be given (the interface will pop up prompts to confirm whether to open the door or not).
25.PLC: Delta or Panasonic series
26. Data acquisition: Adopt temperature acquisition module and current can card acquisition module
27. Circuit breakers, relays, etc.: Schneider or designated brands
28. Communication protocol: RS485
29. Buzzer and indicator light: The buzzer trigger mode and time can be set, with red and green indicator lights
30. Power supply: 380VAC. Three-phase four-wire
31. Total equipment power: about 10KW