The main purpose of curing equipment equipment:
    This equipment is mainly used for high-temperature curing of automotive AI, lenses, Haomi wave radar, mobile phones, diving supplies, electronic products, etc. The production process is adopted and widely used.
technical parameter:
1. Heating method: stainless steel heating tube (infrared glass heating tube) 500W 220VAC/piece; resistance value 96.8Ω; insulation value above 500MΩ; high voltage resistance value above 1500VAC;
2. Curing form: pallet feeding (20 pcs/tray)
3. Curing chamber: 6 pieces (300*160*350mm/piece) with independent temperature control; a material-to-material sensor is installed in the cavity
4. Curing temperature: 90℃ custom (~120℃ max)
5. Curing time: 50 mins controlled by PLC program; does not include heating/decreasing time; increase the comparison between the set temperature and the actual temperature to ensure the time comparison; after the curing time is completed, directly open the furnace without cooling;
6. Control mode: independent temperature control PLC for each furnace chamber
7. Temperature fluctuation: ±3℃
8. Temperature uniformity: ±3℃ no load
9. Heating rate: 10℃/min, reach 90℃ within 5 mins, each furnace outputs the corresponding temperature curve;
10. Cooling rate: reach 40°C within 5 mins, each furnace outputs the corresponding temperature curve;
11. Equipment surface temperature: ambient temperature (temperature: 25°C) + 10°C except around the door joint;
12. Opening method: drawer type, program-controlled opening, high temperature cylinder, opening repeatability ±0.1mm
13. Door opening and closing sensing: sensor
14. Dimensions: length 1400*width 850*height within 2000mm (including casters/foot cups, excluding alarm lights and FFU)
15. Safety devices: leakage protection, overheating protection (the alarm system starts immediately during protection;) PLC temperature control module program protection (independent protection); thermocouple temperature control table protection *2 groups (independent protection, inside the cavity);
16. Human-machine interface: Weiluntong 10-inch touch screen (6-grid temperature and time setting and display)
17. PLC: Mitsubishi/Panasonic/Delta optional
18. Circuit breakers/relays, etc.: Schneider
19. Communication function: RS485
20. Alarm or reminder device: three-color light
21. The form of tray entering the furnace cavity: automatic operation of high temperature cylinder (or manual button opening and closing the door)
22. Power supply: 380VAC configuration with external 4M power cord + plug
23. Total equipment power: about 10KW
24. Material: The inner tank is made of 1.5T stainless steel 304; the main frame is formed by flat-through welding; the shell material is SPCC1.5T, and the surface is electrostatically sprayed with powder.
25. Insulation material: silicate rock wool not combustible
26. Dust coating material: Rock wool coating uses sheet metal + high temperature sealing ring, non-flammable
27. Filling gap material: glass glue for boiler, non-combustible
28. The main body bears the thrust: 120N
29. Equipment operating noise: less than 70 decibels
30. Equipment operating table: OK/NG indicator
31. Operating height: 90-100cm with casters/foot cups