One Product Introduction:
The principle of the drop test bench test is to lift the test sample to the predetermined height, and then let it fall freely in the predetermined state, colliding with the impact table. Simulate and evaluate the impact resistance strength of transportation packaging under vertical impact and the protective ability of the packaging on the contents, in order to improve and perfect the packaging design; The equipment can meet the requirements for drop testing of test samples of different specifications or shapes.
II Applicable standards:
ISO 2248-1985 Packaging - Vertical impact drop test for intact and fully loaded transport packages
GB/T 4857.5-1992 Packaging Transport Packaging Drop Test Method
JIS Z0202-1994 Drop Test Method for Packaged Goods
JIS C0044-1995 Environmental Test Methods, Electrical and Electronic Free Fall Test Methods
IEC 60068-2-32 AMD 2:1990 Basic Environmental Test Code Part 2
III Product Features:
The drop test bench can perform free drop tests on packaging samples in different directions, including edges, corners, and surfaces;
※ Digital display height, any height within the equipment testing range can be adjusted with an error not exceeding 2%;
Single arm double column structure, equipped with electric reset, electric drop and electric lifting devices, and mechanical limit for up and down displacement to ensure safe use;
The use of hydraulic devices in the drop arm greatly improves the accuracy of releasing test samples, ensuring maximum free drop of the samples;  
The impact table is made of a single piece of high rigidity steel plate, which is flat and not easily deformed;
Composite material support rod ensures maximum non-destructive testing and support strength of the test sample;
No foundation is required for installation, just place the machine on a flat marble or cement floor;
The power system is replaced with domestic brand servo motors, which are smooth, silent, and high-precision;
The control system adopts PLC+7-inch color industrial touch screen control replacement, with intuitive and simple operation:
4 Main technical parameters:
*Drop height: 300-1500 (mm)
*Drop height deviation: ± 2mm
*Maximum weight of specimen: 60 (kg)
*Maximum size of specimen: 800 × 800 × 1000 (mm)
*Impact panel size: 1200 × 1500 × 10 (mm)
*Height display: using high-precision encoder induction, timely digital display
*Control mode: PLC+7-inch color industrial touch screen
*Falling method:
1. Face drop: The maximum angle between the drop surface of the test sample and the horizontal should not exceed 2 °.
2. Edge drop: The maximum angle between the edge of the test sample and the horizontal plane shall not exceed 2 °, and the error of the angle between the specified surface on the test sample and the impact table shall not exceed ± 5 ° or 10% of the angle (whichever is larger), so that the gravity line of the test sample passes through the dropped edge.
3. Angle drop: The angle error between the specified surface on the test sample and the impact table should not exceed ± 5 °, so that the gravity line of the test sample passes through the dropped angle.
*Safety protection: overload, overcurrent, short circuit, leakage
*Power consumption: 2.2 (Kva)
*Dimensions: 1200 × 1500 × 2300 (mm)
*Net weight: 600 (kg)
*Power supply: 220V, 50HZ
*Note: Special specification requirements can be customized.