1. Purpose:
This tester is suitable for evaluating the horizontal combustion characteristics of automotive interior materials.
2. Principle:
Clamp the sample horizontally on the U-shaped bracket, ignite the free end of the sample with a flame of a specified height in the combustion chamber for 15 seconds, and determine whether or when the flame on the sample goes out, as well as the distance and time it takes for the sample to burn at that distance.
III. According to the standards:
This tester is manufactured in accordance with the requirements of FMVSS 302, GMW 3232, and GB 8410.
Test box 385x204x360mm, bottom exhaust hole diameter 19mm, 10 pieces
Sample clamp U-shaped, inner frame: 330mmx50mm
Sample 356x100mm, thickness not exceeding 13mm
At least 5 samples are required
The distance from the end of the sample to the top of the burner is 19mm
The inner diameter of the nozzle is 9.5mm
The angle of the burner is vertical
Burning flame height 38mm
Flame burning time 15s
Marking line distance 127mm/254mm
Burning gases such as natural gas, coal gas, or butane
Volume (WxDxH) 68x22x41cm
Weight (approximately) ≈ 28Kg
Power supply: AC 220V 50Hz 3A