1、 Product Introduction
The manufacturing of the SYD-265C petroleum product kinematic viscosity tester complies with the requirements specified in the industry standard SY/T 5651 "Technical Conditions for Petroleum Product Kinematic Viscosity Testers" of the People's Republic of China. It is suitable for measuring the kinematic viscosity of liquid petroleum products (referring to Newtonian liquids) under a constant temperature condition in accordance with the provisions of the Chinese standard GB/T 265 "Petroleum Product Kinematic Viscosity Determination Method and Dynamic Viscosity Calculation Method".
2、 Main technical parameters and indicator products
1. Working power supply: AC (220 ± 10%) V, 50Hz ± 5%.
2. Heating power: 1600W.
3. Mixing motor: power 15W; The speed is 1200r/min.
4. Temperature measurement range: room temperature~100 ℃.
5. Temperature control accuracy: ± 0.1 ℃.
6. Constant temperature bath: capacity, 20L; Form, two layers of cylinders (double cylinder) inside and outside.
7. Usage environment: ambient temperature -10 ℃~+35 ℃, relative humidity<85%.
8. Temperature sensor: Industrial platinum resistor, with a division number of Pt100.
9. Power consumption of the whole machine: not more than 1800W.
10. Capillary viscometer: A set of 6 tubes, all in accordance with GB/T265-88 standard, with inner diameters of
0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 2.5mm.
11. Mercury thermometer: Two thermometers, 0-50 ℃ and 50-100 ℃, with an accuracy of 0.1 ℃, meeting the technical requirements for liquid thermometers used in petroleum product testing.