Product description:
This machine is suitable for testing the tensile strength, elongation, tensile stress, peeling, shear force and adhesion of finished or semi-finished test pieces of various materials, such as shoes, tires, textiles, acrylic, FRD, ABS, EVA, PV, etc. This machine is driven by AC servo motor and driven by belt and gear to make the cross arm rise or fall. After the test piece is stretched or compressed, the computer system analyzes the data obtained from the force sensor. The instrument is designed in accordance with ISO, JIS, ASTM, DIN, GB and other relevant standards
Product specification:
*LOAD: 100KG, 200KG, 500KG optional or specified
*Resolution: 1/300000 Displacement decomposition: 0.001 mm
*Unit switching: multiple measurement units including kgf, lbf, N, KN, KPa and Mpa are included. You can also customize the required units;
*Tension pressure precision range:+0.5%
*Test speed: computer controlled, no segment, maximum speed 10-500mm/min
*Fixture: one set of fixture shall be provided, and the additional cost shall be calculated separately
*Maximum stroke: 700mm, without clamp
*Screw: high-precision precision ball screw
*Motor: Panasonic servo motor
*Transmission bearing: Japan (NSK)
*Exterior: all powder paint, and the column protective sleeve is made of aluminum profile, which is beautiful and elegant
*Protection device: including up and down travel control switch, programmed maximum load maximum extension automatic stop emergency switch
*Machine weight: about 85kg
*Volume: host part 45 × fifty-three × 132cm(W × D × H)
*Power supply: AC220V, 50Hz
*Including original computer, display and printer
*A set of control software