Product Description

       This plug-in force testing machine is suitable for the insertion force and pull-out force test of various connectors.

Get a completely accurate plug-in force test, use the Chinese screen settings of Windows windows, the operation is simple and convenient, and all data can be stored

(test conditions, displacement, graphs, life graphs, inspection reports, etc.)

The female connector can be automatically aligned, and there will be no problem of eating one side. Optional dynamic impedance test system, which can test the dynamic impedance while testing the insertion force

Resist and draw (load stroke-impedance curve)


Features

1. The test conditions of the 1220S plug-in force testing machine are set by the computer screen and can be stored. Check the setting from the drop-down menu or enter the number directly

according to. (Including test type, measuring movement direction, load measuring range, stroke measuring range, stroke origin position, stroke origin detection,

Measurement speed, total measurement times, pause time, waiting position for each time, air pressure times, etc.).

2. Graphics can be stored and printed (load-travel curve-load decay life curve-inspection report). The overload protection function of the load cell can be

Make sure that the load cells are not damaged.

3. Simultaneously display the load-stroke curve and the life curve.

4. Automatic load zero detection, and can set the origin detection load value.

5. Load unit display: N, lb, gf, Kgf can be switched freely.

6. The 1220S plug-in force testing machine is designed with high rigidity structure and is equipped with a servo motor, which can ensure the accuracy under long-term use, and is suitable for general introduction.

Tension compression test and insertion force life test.

Test items

1. Connector single-hole plug-in test

2. Connector plug-in life test

3. Connector Normal Force test

4. Connector plug-in test

5. Connector single pin and plastic retention force test

6. It can be connected to the contact impedance machine at the same time (optional)

7. Various compression and tensile failure strength tests.

Product Specifications
1. Determine the maximum load: 50Kg

2. Minimum decomposition capacity: 0.01Kg

3. Maximum measuring height: 150mm

4. Minimum fine-tuning distance: 0.01mm

5. Measuring speed range: 0-150mm/min

6. X-axis movement range: 0-70mm

7. Y-axis movement range: 0-70mm

8. Transmission mechanism: ball screw

9. Drive motor: Japanese Panasonic servo motor

10. Appearance size: 420×280×960mm

11. Weight: 67Kg

12. Power supply: 220V/50Hz