Product Description:

The wear characteristics of this machine can be applied to a wide range of materials. If there is sufficient test area on the formed parts, it can be directly taken, which is the biggest feature of this machine. It has the characteristics of easy operation and the simplest sampling of specimens, and needs to be used in conjunction with a specific gravity balance. Standard basis: DIN-53516, ISO-4649, GB/T9867/SATRA TM174, BS-903

Product specifications:

*Test load: 2.5N, 5N, 10N

*Lateral displacement of fixture: 4.2 ± 0.04mm/roller per revolution

*Roller diameter: Φ (150 ± 0.2) mm

*Roller length: 460mm

*Roller speed: 40 ± 1r. p.m

*Wear stroke: 40m (20m), equivalent to 84 (42) roller turns

*Wear speed: 0.32m/sec

*Tilt angle: 3 ° (angle between the specimen holder and the vertical surface of the roller)

*Volume (approximately): 70cm × 30cm × 30cm

*Weight (approximately): 61kg

*Power supply: 1 Å AC 220V 3A (depending on country or specified)

*Configuration: One standard adhesive, one sampling knife, one sandpaper sheet, one pre grinding head, one positioning plate, and one sampling drilling machine

*To be used in conjunction with an electronic analytical balance (purchased separately)

 
笔记