The product description
* capacity: 10t,30t,50t
* temperature: room temperature to 300 ℃
* chronometer: LCD display, time range: 0.1s ~ 99min ~ 9.9hr
* temperature control method: P.I.D microcomputer has stable performance and accurate temperature control.
* heating device: the inner cylinder of the heating mold, scientific coordination of hole position, quick temperature generation, long life and easy maintenance
* heating time: room temperature to 170 ℃ about 15 min
* hot-pressing plate: 350 x 350mm high-temperature SKD imported steel plate, hard chromium plating on the surface, fast thermal conductivity, and parallel invariant pressure
(both upper and lower heating can be cooled with tap water)
* appearance size: 1100mm long * 650mm wide * 1500mm high
* tablet: 350 mm * 350 mm
* gap between upper and lower die :90mm
* temperature control requirements: two sets of plate dies shall be heated separately.
* maximum temperature up to 300 degrees Celsius,
* heat stability when the temperature deviation is less than. Temperature display accuracy: + / - 3 ℃
* piston movement speed :9mm/s
* cylinder travel: Max 180mm
* cylinder speed: 9mm/s
* pressure table: 0 ~ 200kg/sq.cm
* volume :(W * D * H)1100 * 650 * 1500 mm
* power source: 3 less, AC380V, 20A
* weight: about 960kg