Product description:
The machine is suitable for testing various materials such as shoes, tires, textiles, acrylic, FRD, ABS, EVA, PV...The machine is driven by AC servomotor and driven by belt and gear to make the cross arm rise or fall. After the specimen is stretched or compressed, the data of force sensor are analyzed by computer system.The design of this instrument conforms to ISO, JIS, ASTM, DIN, GB and other related standards
Product specifications:
* LOAD: 200KG, 500kG,1000KG,2000KG optional or specified
* resolution: 1/300,000 displacement decomposition: 0.001mm
* unit switching: all international units can be switched at will
* tension pressure accuracy range: + 0.5%
* test speed: computer controlled segmentless quantity, maximum speed 10-500mm/min
* fixture: with a set of belt clip, the additional cost will be calculated separately
* maximum stroke: 1000mm
* screw: high precision ball screw
* motor: panasonic servo motor
* transmission bearing: Japan (NSK)
* exterior: all powder paint, aluminum profile for column protection, beautiful and generous
* protection device: including up and down stroke control switch, the program sets the maximum load maximum extension automatic stop emergency switch
The drive motor is a servomotor, which is completely controlled by a computer.
The DC motor is controlled by voltage and needs to be controlled in different sections.
* volume: main engine 68*60*220 cm (including lower frame)
* power supply: 1§,220V,15A
* including original computer, monitor and printer
* a set of control software
* control system: 900C temperature controller imported from Korea
* inner box material: SUS304# cold resistant, heat resistant stainless steel plate, after mirror treatment
* outer box material: SUS304# heat-resistant and cold-resistant stainless steel plate, or the surface painting box (customer specified)
* insulation material: imported high-strength fire-resistant PU foam insulation material, rigid polyurethane foam + glass fiber.
* product observation window: 350×250×40 mm three-layer vacuum layer with lighting
* supply air circulation system: adopt multi-wing centrifugal wind wheel and sealed type motor, which is not easy to lose oil and girdle
* refrigeration system: fully enclosed mechanical single-cooling compressor, environmental protection cold coal
* equipped with: one main machine (force measuring main machine, thermostat), one set of special test software, one set of original computer, excluding computer desk
* equipment volume: about 60*220*165cm
* power supply of equipment: 220V,50Hz/60Hz,20A